Fixed quote after a free call

Cold chain monitoring with temperature excursion records you can hand over

When a reefer trailer or cold room drifts out of range, what matters is how fast someone acts and whether you can show what happened afterwards. We build a workflow that reads temperature from your loggers, trailer sensors or monitoring platform, detects excursions against each product's limits, alerts the driver, dispatcher or site lead while there is time to act, and assembles an excursion record with readings, actions and the final decision. A typical build costs $1,000 to $2,500 and takes about four to five weeks.

The problem

Why temperature excursions are found too late

Temperature loggers record everything, but the data is often downloaded at the end of a trip or checked on a portal when someone remembers. By then a short excursion has become a rejected load or a quality hold.

When an excursion does happen, the record is assembled by hand from a chart, a few emails and a phone call log. Customers and auditors ask for it in a consistent form, and in the US, FDA rules require adequate temperature controls during transport and, under the food traceability rule, records available within 24 hours of a request.

What we build

What our cold chain monitoring automation includes

Temperature feed

Readings from loggers, trailer telematics or your monitoring platform through its API, webhook or export.

Product limits

Temperature ranges and allowed durations per product or customer, set by your quality team.

Excursion detection

Excursions flagged when readings stay outside limits longer than allowed, not on every single spike.

Timely alerts

The driver, dispatcher or site lead alerted by text or chat with the reading and location, with escalation.

Excursion record

A report per excursion with the reading chart, alerts, acknowledgements, actions taken and the final disposition.

Customer and audit pack

Records stored by shipment or batch and exportable for customers and inspections.

Who does what

Automation does the chasing, people make the calls.

Every step is marked: what runs on its own, what a member of staff reviews and what stays with a person who decides.
  1. 01 Automated

    Readings arrive

    Temperature readings arrive from loggers, trailers or the monitoring platform.

  2. 02 Automated

    Excursion detected

    Readings outside the product limit for longer than allowed open an excursion.

  3. 03 Automated

    People alerted

    The driver, dispatcher or site lead is alerted with readings and location.

  4. 04 Ops team review

    Actions recorded

    The team acts and records what they did, and the record fills in automatically.

  5. 05 Engineer or ops lead decides

    Disposition

    Whether product is accepted, held or rejected is decided by the quality lead, never by the workflow.

How it behaves

How temperature excursion handling behaves

What each person sees and what runs in the background, including what happens when something goes wrong.

What the customer sees

  • Fewer rejected deliveries
  • A clear, consistent excursion record when one happens
  • Faster answers to quality questions

What the team sees

  • Alerts with reading and location while there is time to act
  • An excursion record that fills in as they work
  • Records stored by shipment or batch

What the automation does

  • Checks readings against product limits and durations
  • Alerts and escalates to the right person
  • Builds the record and never decides disposition

Edge cases and fallbacks

Logger gap during transit
Marked as missing data in the record, not as in range.
Door-open spike during loading
Ignored if it stays within the allowed duration for that product.
Two products with different limits in one load
Checked against the strictest limit, with both recorded.
Platform or n8n outage
Logger data is pulled again on recovery and the record notes the gap.
No one acknowledges
Escalates to the next person and the site or transport lead.

Architecture

Cold-chain excursion handling at a glance.

The setup we usually start from. We adapt it to the phone system and practice software you already use.
Temp loggers Trailers, rooms n8n workflow Limits per product Alerts Driver, dispatch Excursion record Readings, actions Ops team Acts and records Quality lead Disposition Audit pack By shipment
  • Input
  • Logic and services
  • Output
  • Data
  • People

How it flows

  1. 1 Temperature readings arrive from loggers, trailer sensors or the monitoring platform.
  2. 2 n8n checks them against each product's limits and allowed duration and opens an excursion when needed.
  3. 3 The driver, dispatcher or site lead is alerted and their actions are written to the excursion record.
  4. 4 The quality lead decides the disposition, and the completed record joins the shipment's audit pack.

Project planner

How the project runs, phase by phase.

Typical durations for a first version. Your proposal lists the exact phases, dates and what you sign off at each step.

Cold-chain temperature excursion records project plan

Typical time to launch: about 4 weeks, then support

  1. 01

    Discovery

    2 to 3 days

    Loggers and platforms, products and limits, current excursion process and record formats.

  2. 02

    Design

    2 to 3 days

    Detection rules, alert chain, record template and storage.

  3. 03

    Build

    About 2 weeks

    Temperature feed, detection, alerts, record assembly and export.

  4. 04

    Shadow run

    About 1 week

    Run on live readings with alerts to a test channel, compared with past excursions.

  5. 05

    Launch

    1 to 2 days

    Alerts to the real team, starting with one lane or site.

  6. 06

    Support

    Ongoing

    New products, limits, lanes and customer report formats.

What it runs on

Real products only, connected through the access each vendor provides. See all integrations

n8n Your logger or telematics platform API or export AWS IoT Core or your IoT platform Twilio SMS or Microsoft Teams Google Drive, SharePoint or S3 for records Your transport or warehouse system, where connected

Cost estimate

What it costs, line by line.

Estimates to plan with. Your fixed quote follows a free call, once we have seen your systems and volumes.
  • Discovery and design

    Limits, alert chain and record template.

    $200 – $400

  • Build

    Feed, detection, alerts and record assembly.

    $500 – $1,300

  • Integrations

    Logger platform, messaging and storage.

    $150 – $400

  • Testing and shadow run

    Live readings compared with past excursions.

    $100 – $250

  • Launch and training

    First lane or site and team walkthrough.

    $50 – $150

  • Total project estimate

    $1,000 – $2,500

Optional monthly care after launch is quoted with your proposal. Fixed quote after a free call. Covers one temperature data source; several logger brands or platforms may need a second workflow. Platform and messaging costs are billed to you directly.

Monthly running costs you pay directly

Estimates from the vendors' published pricing, checked November 2026. Billed to you by each vendor, never marked up.

  • n8n: Free self-hosted Community edition, or n8n Cloud from about €20 a month (Starter) or €50 (Pro), billed annually.
  • SMS: Your SMS provider's published per-message rates.

What pushes cost up

  • Systems without an API, or with integration access that must be requested from the vendor
  • Writing data back into your core system rather than only reading from it
  • Several locations, brands or very different processes to support
  • Custom apps, dashboards or a voice line on top of the workflows

What keeps cost down

  • One location and one clear process to start with
  • Cloud software with a documented API
  • Using tools you already pay for instead of adding new ones
  • Approved wording and sample data ready at the start
Get a fixed quote

Privacy and consent

Rules we design for, with the sources.

General information to plan with, not legal advice. Your counsel or data protection adviser confirms what applies to your practice.

US: sanitary transportation of food

The FDA sanitary transportation rule covers adequate temperature controls during transport, with records kept for a period that does not exceed 12 months depending on the record type.

Source: www.fda.gov

US: food traceability records

Under the FDA Food Traceability Rule, records must be provided within 24 hours of a request; FDA has said it will not enforce the rule before July 20, 2028.

Source: www.fda.gov

EU and UK: driver and location data

Alerts that include driver names and vehicle locations are personal data, so processors are under GDPR Article 28 contracts.

Source: gdpr-info.eu

How we deliver

Agile delivery, in 1 to 2 week sprints.

We deliver in short Agile sprints using Scrum, so you see working software every one or two weeks instead of waiting for a big reveal at the end.

Every sprint

  1. 1 Sprint planning. At the start of each sprint we agree which backlog items we will finish, each with written acceptance criteria you can check.
  2. 2 Daily stand-up. A short internal check-in on progress and blockers. You get a written update in your Slack or Teams channel, not another meeting.
  3. 3 Sprint review and demo. At the end of each sprint we demo what was built on test data or in a shadow run, and you accept it or ask for changes.
  4. 4 Retrospective. The team looks at what went well and what to change in the next sprint, and we share anything that affects you.

How scope stays under control

Product backlog
Every feature, fix and question in one prioritised list you can see at any time.
Acceptance criteria
Plain-language conditions for "done" on each item, agreed before work starts.
Change requests
New ideas go into the backlog with an estimate. Nothing changes scope or price without your written approval.
User acceptance testing (UAT)
Before launch your team tests the real workflow against the acceptance criteria and signs off.

Tools we use

Jira, ClickUp or Trello for the backlogSlack or Microsoft Teams for updatesGitHub for code and version historyLoom or a live call for demos

Project manager / Scrum master

Runs the sprints, keeps the backlog and timeline honest, and is your single point of contact.

Business analyst

Maps how the work runs today, writes the workflow specification and acceptance criteria with your team.

Automation engineer

Builds the n8n workflows, integrations, AI steps and error handling.

Backend developer

Writes custom code where a no-code step is not enough: APIs, data sync, secure storage.

Frontend / mobile developer

Builds forms, booking pages, dashboards, web apps or Android apps when the project needs them.

QA engineer

Tests every workflow against the acceptance criteria, including edge cases and failure paths.

DevOps engineer

Sets up hosting, access, backups, monitoring and alerts, and the deployment pipeline.

Who does what at each phase

Free call
Project manager, business analyst
Understand the problem, check it is worth automating and outline a rough range.
Discovery
Business analyst, automation engineer
Map the current process, systems and data, and agree success measures.
Design
Business analyst, automation engineer, backend developer
Write the workflow specification, data flows, compliance notes and backlog with acceptance criteria.
Sprints
Automation engineer, developers, QA
Build, test and demo in 1 to 2 week sprints; you accept or adjust after each demo.
UAT and launch
QA, DevOps, project manager
Your team tests and signs off, we switch on, monitor closely and train the team.
Support
Automation engineer, DevOps
Stabilisation window, then optional monthly care with monitoring and changes.

A point of contact

One person who can answer questions and approve decisions, with about an hour a week during the project.

Access

Admin or API access to the systems involved, created as separate accounts with the least access needed.

Sample data

Real but non-sensitive records (or de-identified ones) so we can design and test against reality.

Approved wording

Message templates, policies and consent wording (for SMS, your opt-in and opt-out text) reviewed by you.

Vendor agreements

Signed agreements with the software vendors that will handle personal data, such as a BAA or processor contract.

Time for testing

A few hours from the people who will use the system, for the demos and user acceptance testing.

Working system

Workflows, integrations and any apps running in your accounts, under your keys.

Documentation

Workflow specification, data-flow map, run book and exported workflow files.

Training

A walkthrough for the team and a short recorded video for new starters.

Handover

All access, credentials and code handed over; you can keep us or take it in-house.

Stabilisation window

Fixes for anything that does not meet the agreed acceptance criteria after launch.

Support options after launch

  • No plan

    You run it yourselves after the stabilisation window and contact us when you need a change.

  • Monthly care

    Monitoring, error alerts, small changes and updates each month, with an agreed response time.

  • Priority care

    Faster response times for business-critical workflows and a monthly review call.

How a project moves through our team

Free call PM and analyst Discovery Process and data Design Spec and backlog Sprints Build, test, demo Your review Accept or adjust UAT and launch Sign-off, go live Support Monitor and improve
  • Input
  • Logic and services
  • People
  • Output
  • Data

How it flows

  1. 1 A free call with the project manager and business analyst to understand the problem and whether it is worth building.
  2. 2 Discovery and design produce a written specification, data-flow map and a backlog with acceptance criteria.
  3. 3 The team builds in 1 to 2 week sprints; you review a demo at the end of each and accept or adjust.
  4. 4 Your team runs user acceptance testing, we launch, then monitor and improve under a support plan.

FAQ

Cold-chain temperature excursion records questions, answered.

A period when a product's temperature goes outside its allowed range. Whether it matters depends on how far, how long and the product, which is why limits and allowed durations are set per product by your quality team.

No. It detects, alerts and records. Whether product is accepted, held or rejected is decided by your quality lead.

Any logger, trailer sensor or monitoring platform that offers an API, webhook or scheduled export. We confirm the route for your devices before quoting.

It works on top of the sensors and platform you already have, adding the alerting, escalation and records that most logger portals leave to people.

The FDA sanitary transportation rule requires adequate temperature controls during transport; the food traceability rule focuses on traceability records. We help you keep records in a consistent form; your quality team and advisers decide what your obligations are.

Excursions per lane or site, time from excursion start to acknowledgement, excursions resolved before product was affected and time to produce a record on request.

Free 20-minute call

Want this for your iot & connected device?

Book a free 20-minute call. We will look at how the work runs today, tell you honestly whether it is worth building and give you a fixed quote if it is.

Book a free 20-minute call